Evoqua DEPOLOX - Page 34

34 WT.050.570.000.DE.IM.0714
Operation DEPOLOX
®
Pool
1.3
Operation You have the following options starting from the basic display:
Switching between the basic dis-
play/line diagrams
Press the up or down key
Select the area of operation
 To select the menu press the
"MENU" softkey
 For calibration press the "CAL"
softkey
 To set the operating mode
press the "MODE" softkey
In the menu display select a
menu item
 Select the menu item with the
arrow keys (arrow in front of
menu item)
 Confirm the selection with
"ENTER"
Change/enter displayed parame-
ters
 Select the parameter with the
arrow keys (arrow in front of
parameter)
 Confirm the selection with
"ENTER"
 Change/enter the display with
the up or down key
 Confirm the entry with
"ENTER"
Cancel entry Press the "ESC" key to exit the
menu item. Entries which have
not been confirmed are reset to
their original settings.
Reactivate password protection This function is only active when
a password has been program-
med.
 Change/enter displayed para-
meter
 Block the system entry with the
"LOCK" softkey in the menu
display
Exit the menu item
 Press the "ESC" key
or
 Press the "BACK" softkey