Extreme Networks EPICenter Guide User Manual

Step 5. Edit the Remote Access Policy to add a VSA
EPICenter Concepts and Solutions Guide
231
Figure 116: The Edit Profile window, Advanced Tab
7 Select Vendor-Specific and click Add.
The Multivalued Attribute Information window appears.
Figure 117: The Multivalued Attribute Information window
8 Click Add again. The Vendor-Specific Attribute Information window appears. This is where you add
the EPICenter VSA settings.

Extreme Networks EPICenter Guide Specifications

General

Brand	Extreme Networks
Model	EPICenter Guide
Category	Software
Language	English