Extron electronics DMP 128 Plus - Page 147

DMP 128 Plus • Remote Control and Configuration 139
Command ASCII command
(host to device)
Response
(device to host)
Additional description
Write Names
Write input name
EX5(,X6$ NI} NmiX5(,X6$]
Write virtual return name
EX6),X6$ NL} NmlX6),X6$]
Write EXP input name
EX6!,X6$ NE} NmeX6!,X6$]
Write output name
EX6@,X6$ NO} NmoX6@,X6$]
Write EXP output name
EX6#,X6$ NX} NmxX6#,X6$]
Write preset name
EX5*,X6$ NG} NmgX5*,X6$]
View Names
View input name
EX5(NI} X6$]
View virtual return name
EX6)NL} X6$]
View EXP input name
EX6!NE} X6$]
View output name
EX6@NO} X6$]
View EXP output name
EX6#NX} X6$]
View preset name
EX5*NG} X6$]
Recall Presets
Recall Preset
X5*. RprX5*]
Reset to Factory Defaults
Reset presets and
names
EZG} Zpg]
Reset individual preset
EX5*ZG} Zpg X5*]
System reset
(factory default)
EZXXX} Zpx]
Reset flash file system
EZFFF} Zpf]
Absolute reset including
IP settings
EZQQQ} Zpq]
Reset all device settings
and delete files
EZY} Zpy]
Reset excludes IP address,
subnet mask, gateway IP
address, unit name, DHCP,
and port mapping in order
to preserve communication
with the device.
NOTES:
X5*
= Preset number 1 through 32
X5(
= Input number 1 through 20 (inputs 13-20 are Aux inputs)
X6)
= Virtual return number 1 through 16
X6!
= EXP input number 1 through 16 (1 through 48 on DMP 128 Plus AT models)
X6@
= Output number 1 through 12 (outputs 9 through 12 are Aux outputs)
X6#
= EXP output number 1 through 16
X6$
= New Name Invalid characters = ~ , @ = ‘ [ ] { } < > ` “ : ; | \ and
?