Extron electronics DMP 128 Plus - Page 183

DMP 128 Plus • Web Pages 175
Audio Page
On the Audio page, codecs can be added or removed from the selected line. Codecs
added to the line are available during call negotiation. A minimum of one codec must be
present in the Assigned column. Codecs placed higher on the list are treated as preferred
codecs during call negotiation.
Figure 210. VoIP Line Audio Configuration Page
To add a codec to the Assigned column:
1. Select the desired codec in the Available column (see figure 210,
1
above).
2. Click the right arrow (
2
) button between the two columns.
3. The codec moves from the Available column to the Assigned column (
3
).
To change codec priority in the Assigned column:
1. Select a codec in the Assigned column (
1
).
2. Click and drag that codec to the desired position in the list.
To remove a codec from the Assigned column:
1. Select the codec in the Assigned column (
1
).
2. Click the left arrow button between the two columns (
4
).
3. The codec moves from the Assigned column to the Available column (
3
).
figure 210. VoIP Line Audio