DMP 128 Plus • Configuration Tools 85
3. The Firmware link opens the firmware Download Center page. Click the D from the
alphabet list at the top of the page (see figure 147,
3
below).
4. Select the Download link (
4
) at the right side of the DMP 128 Plus listing.
Figure 147. Download Center and Firmware Link
5. After clicking the Download link, select Run from the next page to run the firmware
installer (see figure 148,
5
below). Alternatively, select Save (
6
) to save the firmware
installer and install the firmware at a later time.
Figure 148. Firmware Installer Run or Save
figure 147. Download Center and Firmware Link
figure 148. Firmware Installer Run or Save
To Next Page
Loading...
