ST80/ST80L Flow Meter OPERATION
Fluid Components International LLC 51
Command 15: Read Device Information
Flow Alarm Selection Code
Flow Transfer Function Code (not supported)
Flow Upper and Lower Range Value Units Code
Flow Analog Channel Flags (not supported)
See Table 16, page 62, for response code list.
Command 16: Read Final Assembly Number
See Table 16, page 62, for response code list.
Command 17: Write Message Into Device
Message String Used by Master
See Table 16, page 62, for response code list.
Note: 1. The value returned in the response data bytes reflects the value actually used by the field device.
Command 18: Write Tag, Descriptor, Date
Descriptor Used by Master
Date Code: Day, Month, Year (YR = setting year minus 1900)
See Table 16, page 62, for response code list.
Note: 1. The value returned in the response data bytes reflects the value actually used by the field device.
Command 19: Write Final Assembly Number
See Table 16, page 62, for response code list.
Note: 1. The value returned in the response data bytes reflects the value actually used by the field device.
To Next Page
Loading...
Need help?
General
