EasyManuals Logo

Fermax Cityline User Manual

Fermax Cityline
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
18 2011 ACCESS CONTROL
2011 ACCESS CONTROL 19
18 2011 ACCESS CONTROL
2011 ACCESS CONTROL 19
Loft Private
Ref.4530
Proximity
• Access control reader which allows the door to be opened
by swiping the proximity card or keyring. Only authorised
cards or keyrings activate the device. Physical contact is
not necessary.
• Capacity: up to 400 user cards or keyrings.
Module finished in textured ABS plastic.
Surface installation.
• Recommended for interior use.
Includes 50 cm of wiring.
• Reader and controller integrated within the same module.
Acoustic and visual confirmation using LEDs which
advise if the card swiped has been accepted/rejected.
Dimensions: (horizontal)x(vertical)x(depth) mm
INSTALLATION
The reader is located in the exterior area. The rest of the
devices are connected to this module and they are installed in
the building's interior: power supply and lock-release. An exit
button can be used optionally.
TECHNICAL FEATURES
Does not require physical contact.
4 cm (card) or 1 cm (keyring) reading distance.
Acoustic and visual status data.
Manual programming (using master card or keyring)
or via PC software (card activation/deactivation).
Door sensor and exit button control.
Relay output.
Relay lock-release activation with programmable
time. Programmable from 1 to 99 seconds.
Status LED (help in programming and determining
status).
SPECIFICATIONS
• Reader Dimensions
• Environmental Protection (IP)
• Anti-Shock Protection (IK)
• Power Supply (V)
• Consumption (mA) S/lock-release
• Operating Temperature
60x130x23
66
06
12V (ac/dc)
45/75
0º to 60ºC
Lock-Releases
Exit Button
Power Supply
Ref.2347
230Vac
2
2
2
2
PROGRAMMING
This can be done in 3 ways:
Master card: The first time the power supply is
connected, the system waits for a proximity card to be
swiped. This is then considered the "master card".
Keypad: Recommended if we want to deactivate
faulty cards.
PC Software: For managing user activation/
deactivations. The WINPROX software can be
downloaded from www.fermax.com
STAND-ALONE
IDENTIFIERS
1. Card without magnetic strip (ref.23361); 2. Card with magnetic strip
(ref.2336); 3. Proximity keyring (ref.44501).
1 2
3
12Vdc
12Vac
30708
3071
2888
2880
* Door lock recommended.
Normal
References
Reinforced

Table of Contents

Other manuals for Fermax Cityline

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fermax Cityline and is the answer not in the manual?

Fermax Cityline Specifications

General IconGeneral
Weather ResistanceYes
Operating Voltage12 Vdc
Microphone Sensitivity-40dB
Housing MaterialAluminum
TypeVideo Intercom
InstallationWall-mounted
Frequency Response300Hz - 3.4kHz
WeightVaries depending on module configuration

Related product manuals