Marine Fingerprint
STAND-ALONE
12Vdc
12Vac
30708
3071
2888
2880
* Door lock recommended.
Normal
References
Reinforced
• There are a number of people whose ngerprints do not not have
the necessary information to be set up on a biometric system.
This applies to 1% of the population. In these cases, the use of an
alternative technology combined is recommended.
• Biometric access fingerprint reader with capacitive sensor.
Identifies the user by way of their fingerprint (unique and
unrepeatable characteristic). Built-in proximity reader. Reader also
includes a keypad. Functions as follows:
- For cases where ngerprints cannot be authorized, use integrated
Proximity or Keypad.
- Segurity mode: The reader includes a keypad for dual security
function: Fingerprint+Code, for the same User.
• Integrated in Cityline aluminium panel.
• Flush mounted (ref.8855, including box) or surface mounted
(ref.7065, optional).
• Recommended for interior and exterior use.
• Reader and controller integrated within the same module.
• Includes a software CD and infrared remote keypad.
PROGRAMMING
Programming can be done manually or via PC. In manual mode the
system is programmed using a master fingerprint (administrator)
and an infrared remote keypad. The PC programming software
can be downloaded from www.fermax.com. It allows the «Clone»
option which allows the user to copy all data from one reader to
another.
INSTALLATION
Cityline Keypad+Fingerprint
Ref.6996
Keypad and Fingerprint
Dimensions: (horizontal)x(vertical)x(depth) mm
SPECIFICATIONS
• Dimensions:
* Reader
* Flush Mounted Box (included)
* Surface Box (optional)
• Environmental Protection (IP)
• Anti-Shock Protection (IK)
• Power Supply (V)
• Consumption (mA) S/lock-release
* Fingerprint
* Keypad
• Operating Temperature
130x246
115x233x45
130x246x33
43
07
12V (ac/dc)
118/173
40/110
-10º to 55ºC
Lock-Release
Exit Button
Power Supply
Ref.6996
230Vac
2
2
2
2
024
TECHNICAL FEATURES
FINGERPRINT
• Operating Options (no.of users):
- 4.500 users in 1 fingerprint per person mode.
- 2.970 users in 2 fingerprints per person mode.
• Relay lock-release activation.
• Acoustic and visual status data.
• Manual programming using the infrared remote control
included or via PC software (card activation/
deactivation of fingerprints).
• Reader with 2 status LEDs and a 7 segment 4 digit
display (helps with programming status).
• Special Functions: free access ngerprint button
(trades) and unblock fingerprint (lock-release always
activated).
• Door sensor and exit button control.
• Auxiliary Relay for other Functions. Door alarm and
forced door, panic alarm or intruder alarm (incorrect
fingerprint).
MEMOKEY (KEYPAD)
The identifier is not material since it is memorized by
the user. The user code is entered via the keypad.
Access control keypad allows to open the door by
entering a previously programmed 4 or 6 digit code.
Built-in Proximity reader
To Next Page
Loading...
