Software Wincom+
The WinCom+ application allows you to program MDS
systems. The application was conceived so as to be
able to define simple systems (electronic door entry
system with central unit) and more complex systems
(various central units on a network with access control,
lift control, planner...).
The application in addition to programming the system
(group of central units) can receive incidents, define alert
messages on the screen, carry out a complete test of the
system (all devices on the system), make modifications,
additions, delete users, that is complete management
of all users on the system, (import/export of users via an
Excel sheet, searches, location of users by areas, rapid
addition of users by reading their proximity card, etc).
User friendly graphic interface which is simple and
intuitive in that all options can be viewed as part of a
hierarchical tree.
• 1.022 users.
• 64 groups of users (proles). Each one denes the
restrictions that apply to the group by assigning up to 3
Areas and 3 Schedules.
• 4 special proles without user restrictions.
• 32 Areas. Dene the doors through which access is
permitted.
• 32 Timetables. Denes the periods of time during which
access is permitted to users.
• Holidays (20 holidays and 3 holiday periods).
• Online incident register (entries, exits, access denied,
alerts, etc).
• 32 device activation weekly plans (sensors and relays).
• Limit on the capacity in certain rooms or locations.
• Lift Control.
• Activation of devices associated with each user on
swiping their identifier by a reader.
• Antipassback.
TECHNICAL FEATURES
CENTRALISED
To Next Page
Loading...
