Festo CMMS-AS-C4-3A-G2 Description

2Interfaces
Festo – GDCP-CMMS/D-FW-EN – 1404NH – Engli sh 33
Interface Function Page
1 Motor controller CMMD-A S-C8-3A Digital interface [ X1.1/X1.2]
– Digital inputs (DIN0…13) 50
– Digital outputs (DOUT0…3) 50
Analogue interface [ X1.1/X1.2]
– Analogue inputs (AIN0/#AIN0) 65
– A nalogue output (AMON0) 66
Synchro nisation interfaces
[X1.1/X1.2][X10.1/X10.2]
– Encoder inputs 67
– Encoder outputs 68
– Incremental signals
(A/#A/B/#B/N/#N)
69
– Pulse/direction signals [ X10.1/X10.2]
(CLK/#CLK/DIR/#DIR)
70
– Forward/reverse signals [ X10.1/X10.2]
(CW/#C W/CCW/#CCW)
71
CAN interface [X4]
–CANopen 72
–DriveBus 72
Slots [EXT1/2]
– Inte rf ace module CAMC-...  5 72
– I nput/output module CAMC-D-.. .  5
RS485 interface [X5] 240
2 Control Master device
3 Motor controller CMM... Master or slave devic e
4 Sensors Limit switches 77
Sequenc e c ontrol (NEXT1/2) 148/
5 Interfac e module CAMC-...
Input/output module CAMC-D-...
DeviceNet (CAMC-DN) 72
PROFIBUS DP (C AMC-PB) 72
Digital inputs/outputs (CAMC-D-8E8A)
1)
49
6 PC Master device
7 Festo Configuration Tool ( FCT) Jog/individual step 172
8 Safety switching device Safety function STO ( Safe Torque Off) 12
1) Digital inputs cannot be used.
Tab. 2.9 Control, sensor and safety func tion interfaces

Festo CMMS-AS-C4-3A-G2 Specifications

General

Brand	Festo
Model	CMMS-AS-C4-3A-G2
Category	Controller
Language	English