5 Commissioning
80 Festo – GDCP-CMMS/D-FW-EN – 1404NH – English
5.1.4 FCT Help
The following Help functions are available in the FCT:
Dynamic Help:
• Activate dynamic Help in the FCT user interface: [Menu bar] [Help] [Dynamic help]. When you click on
a field, Help is always displayed dynamically.
1 2 3
1 Menu bar: Help
2 Button. Dynamic Help
3 Window: Dynamic Help
Fig. 5.1 Overview: Dynamic Help in the Festo Configuration Tool (FCT)
Static Help:
– Click in the FCT user interface in a parameter/c onfiguration field. When the F1 key is pressed, the
Static Help is displayed for the parameter/configuration field.
– Activate static Help in the FCT user interfac e:
[Menu bar] [Help] [Contents of installed plug-ins] [Festo] [CMMS-AS/CMMS-ST/CMMD-AS].
Clicking the button “CMMS-AS/CMMS-ST/CMMD-AS” displays the stat ic Help.
Offline Help ( PDF document):
– Print individual pages o r all of th e pages in a bo ok directly from the Help contents by using the
“Print” button in the Help window.
– Print a prepared version of the help in Adobe PDF format:
Printed version
Directory File
FCT help
(framework)
...(FCT installation directory)\Help\ – FCT_de.pdf
Plug-in Help
CMMS-AS
...(FCT installation directory)\HardwareFamilies\
Festo\CMMS-AS\V...\Help\
– CMMS-AS_de.pdf
Plug-in Help
CMMS-ST
…(FCT installation directory)\HardwareFamilies\
Festo\CMMS-ST\V…\Help\
– CMMS-ST_de.pdf
Plug-in Help
CMMD-AS
…(FCT installation directory)\HardwareFamilies\
Festo\CMMD-AS\V…\Help\
– CMM D-AS_de.pdf
Tab. 5.1 Overview: Offline Help