5 Commissioning
88 Festo – GDCP-CMMS/D-FW-EN – 1404NH – English
If multiple firmware files are present on the memory card, the firmware file with the latest
date is loaded into the motor controller!
Whentheprocessfordownloadingthefirmwarestarts,thefirmwareinthepermanent
memory is initially deleted. If the download fails or if the power supply was interrupted
during t he download process, no firmware will have been transferred to the permanent
memory. The firmware download process must be restarted again.
7. The newly loaded firmware star ts automatic ally.
8. Set the DI L switch [S1.8] to the “OFF” position.
To Next Page
Loading...
Need help?
General
