Fimer PVS-175-TL - Page 65

FIMER_PVS-175-TL A.1 Version_Product manual_EN_RevC-
F
65
• Remove the previously installed gasket protective covers by slinding it pulling from the handles.
PVS
NOTE – D Gasket protective covers and handles can be reused for a new installation.
• Fasten all of the four side closures (latches) (16) as shown in the pictures.
PVS
A
B
16
ATTENTION – A Risk of injury due to the high strengt of latches (16). Use the proper
protection gloves.