Glossary
97
MMS
®
Inspection DPM High
Value for RH, Ta, Ts, Td, Ts-Td
Parameter of the alarm function, threshold from when the visual alarm signal
is activated, setting see page 26
13.2.5 Display texts – Data transmission
Block Separator
Selection which character is to be used for the separation of the measured
readings groups (measurement blocks) during data transfer. Use PC-DATEX
only if you want to transfer data via PC-Datex into an Excel spreadsheet.
Bluetooth Classic
Wireless data transmission via the Bluetooth module in the gage, data transfer
to the PC into the PC Datex (Excel Add-In) or other applications.
Clear paired devices
You can use this function to delete the pairing to the other Bluetooth device. If
you use this function to cancel the device pairing, you must also delete the pair-
ing on the other Bluetooth device (e.g. via "Remove device" or similar com-
mand).
DataCenter
Data transmission to the Fischer DataCenter evaluation software.
The Fischer DataCenter is a software solution for evaluating measured read-
ings, creating inspection reports, archiving measured readings and inspection
reports, and for exporting the measured readings in CSV format. You can down-
load the DataCenter program (system requirements: Windows 7 or 10) free of
charge from the download area on Fischer homepage; https://docs.helmut-
fischer.com/st9.
Can not be used in conjunction with Bluetooth.
Device Name
You can use this function to change the name under which the gage is to be vis-
ible to the other Bluetooth device (receiver = PC, smartphone); see page 59.
Factory setting: MMS Inspection
To Next Page
Loading...
