Flexicon PF7 - Initial Pump Set-Up

26.3 Initial pump set-up
i
Optional first step to remove security warning: "Generate
a security certificate (Optional)" on page 131.
Set-up initial network administrator for configuring the connectivity between PC and
pump.
1. Enter the pump IP address into the PC web browser (For example Microsoft
Edge or Google Chrome)
i
Configure your pump name and IP address in the PF7+
Network Settings menu. Refer to "Settings mode" on
page 104.
PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual 127
EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN