10 Installation position
This product does not comply with the ATEX directive and must
not be used in explosive atmospheres.
• Position the pump on a work surface or bench.
• Clear the top, front and back of the pump of obstructions so the controls and
wiring connections are easily accessible when the pump is in use. The pump's
power input plug is the disconnecting device (for isolating the motor drive
from the power supply in an emergency).
PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual 20
EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN
To Next Page
Loading...
