Flexicon PF7 - Protected Recipe; Save Recipe; Print Recipe; Delete Recipe

66 PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual
20.21 Protected recipe
Protected recipes cannot be edited or overwritten. A recipe must be saved before it
can be protected.
To prevent a recipe from being unprotected and edited, hide Protected recipe.
Refer to "Operator access restrictions" on page 105.
i
As a best practice for cGMP, protect recipes and apply user
restrictions to allow filling only with protected recipes.
Refer to "Operator access restrictions" on page 105.
To prevent a user from running a batch using an unsaved or unprotected recipe:
1. Save the recipe.
2. In recipe mode, set Protected recipe to Yes.
3. In settings mode, operator access restrictions or supervisor access
restrictions , Dispense — set Protected recipes only to Yes . Refer to
"Operator access restrictions" on page 105.
4. In settings mode, operator access restrictions or supervisor access
restrictions, Recipe—set Protected recipe to Hidden. Refer to "Operator
access restrictions" on page 105.
5. Log in as the operator or supervisor account. The operator or supervisor will
not be able to start a batch if the recipe is not protected. The operator or
supervisor will require administrator to set a new recipe as protected.
20.22 Save recipe
Saves the current filling parameters under a recipe name.
Saved recipes can be overwritten unless they have been protected. Refer to
"Protected recipe" above.
Up to 200 recipes can be saved.
i
FDA 21CFR Part 11 compliance:
Saving of recipes associated with a complete batch are
recorded in the batch record. Alterations to any recipe are
recorded in the audit trails report.
20.23 Print recipe
Prints the current recipe parameters.
20.24 Delete recipe
Deletes a saved recipe.
i
As a best practice for cGMP, apply user restrictions to
disallow this function.
Refer to "Operator access restrictions" on page 105.