98 PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual
Remove the vial from the balance to proceed.
If the batch is not complete, the process will repeat from the beginning ("Zero waste
filling - weigh checked fill" on page 95 or "Zero waste filling - non weigh checked fill"
on the previous page).
23.4.4 Pausing a Zero waste batch
To pause a batch press . Once the current fill has been completed, the
batch will pause.
When a batch is paused, the following options are available:
• Resume Zero waste batch — This can be hidden, see "Operator access
restrictions" on page 105 . (Only available if a compatible balance is
connected).
• Add note to report—"Add note to report" on page 89
• End batch—"End batch" on page 90
• Batch size—"Batch size" on page 81
• Fluid sample—"Fluid sample" on page 90
23.4.5 Resuming a Zero waste batch
To resume filling press .
When a Zero waste batch is resumed the balance is zeroed by the pump.
To Next Page
Loading...
