Flexicon PF7 - Setting the Filling Method

16.5 Setting the filling method
The filling method defines how each fill will be started.
Time delay between fills —Automated filling with a user defined interval
between fills.
Keypad to start each fill—Manual filling. Press to start each fill.
External input to start each fill— Remote controlled filling. Refer to
"Control wiring" on page 32.
The Filling method icon displays on the Screen info bar.
The filling method can be reset in settings mode. Refer to "Filling method" on
page 104.
PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual 49
EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN