154 PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual
2. When the batch report is exported, it is named using the batch number and
the time and date the batch was started.
i
If the pump has FDA 21CFR Part 11 compliance activated,
a second user approval is required before the report can
be saved. The username and password need to be a valid
user profile that is used to log into the pump, (refer to
"Users" on page 110) rather than the username and
password used to log into NetTools. The second approver
of a batch report must be a different user than the one
who approved the batch when it was created.
To Next Page
Loading...
