Figure 28 - Setup with PF7+, Asepticsu and the Flexicon Advanced Filling
Kit
Before Zero waste batch:
3. Set Vial weight and Vial weight tolerance in the Recipe. Refer to "Vial
weight tolerance" on page 61.
4. Set the height of the filling needle with enough clearance to be able to remove
the vial if there is a drop of fluid hanging on the nozzle.
PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual 93
EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN
To Next Page
Loading...
