Flexim FLUXUS F60 Series - Page 193

19 Settings
FLUXUS F60* 19.3 Working with parameter records
193
UMFLUXUS_F60xV5-0EN, 2017-10-16
19.3.2 Loading a parameter record
Stored parameter records can be loaded and used for measurement.
• Select the program branch Parameter.
• Press ENTER.
• Select the channel for which a parameter record is to be loaded.
• Press ENTER.
• Select the parameter record to be loaded.
• Press ENTER.
19.3.3 Deletion of parameter records
• Select Special Funct.\Delete Para.Rec.
• Press ENTER.
If no parameter record is stored, the message NO PAR. STORED! will be displayed.
• Select the parameter record to be deleted.
• Press ENTER.
• Confirm whether the parameter record shall be deleted.
• Press ENTER.
Parameter\for Channel A:
Parameter\for Channel A:\Parameter from:\Par.Record 01
Special Funct.\Delete Para.Rec.
Special Funct.\Delete Para.Rec.\Delete:
Special Funct.\Delete Para.Rec.\Delete:\Really Delete?