12 - 3
OMNISCANNER User Guide
appear in your PC’s driver list.
Windows 98: When connecting OMNISCANNER2 to a different USB port,
the driver will be automatically installed.
Windows 2000: When connecting OMNISCANNER2 to a different USB
port, a separate installation of the driver from the Scanlink Tools CD is
required.
Uploading OMNISCANNER2 Test Results to the PC
1. To send test results from OMNISCANNER2(s) to a PC, first turn your PC
on.
2. Connect the PC with OMNISCANNER2 via the high-speed USB cable.
3. Turn on OMNISCANNER2
4. Run the Scanlink software and click on the (Upload) button
in the toolbar, or select Upload in the File menu.
5. In the Scanner Type field, select OMNISCANNER.
6. Select the
appropriate port
(USB).
7. Click Upload to
establish communi-
cations between
Scanlink and
OMNISCANNER2 and
upload the
Autotest data that
are stored in the
scanner’s memory.
8. Scanlink can
upload data from
several scanners at once. If you have more than one scanner connected,
the USB Connection List will appear and allow you to select the
scanners you wish to upload from. The OMNISCANNER2s are listed by
serial number. Select the appropriate scanner(s) and click OK to con-
tinue.
To Next Page
Loading...
