OMNISCANNER User Guide
12 - 4
9. If more than one Project is found, the Project List will appear and
allow you to select the project(s) you wish to upload. Make the appro-
priate choice and press OK to continue the upload process.
Once the connection is established, the scanner’s serial number is
displayed in the lower left display panel. A gauge in the lower right
display panel indicates the progress during the upload process.
Scanlink will transfer all of the Autotest results from the scanner and
display a summary of the tests in the main program window.
10. Click Cancel to abort the upload process.
To review collected Autotest data, select the items to be viewed, then
select View Autotest from the View menu. (Consult the Scanlink on-line
help for further information.)
Downloading Configurations to OMNISCANNER2
1. To download Configurations from OMNISCANNER Configuration soft-
ware to one or several OMNISCANNER2s, first turn your PC on.
2. Connect the PC with OMNISCANNER2 via the high-speed USB cable.
3. Turn OMNISCANNER2 on.
4. Run the OMNISCANNER Configuration software, highlight a
Configuration and click the Download button.
5. To make sure that you are downloading the desired Configuration,
the Download Configuration dialog box displays the name of the
Configuration.
6. The Scanner Type is OMNISCANNER.
7. Select the Port (USB) and click OK to continue.
Note
OMNISCANNER Configuration can be used to download configura-
tions to several scanners at once. If you have more than one scanner
connected, the USB Connection List will appear and allow you to
select the scanners you wish to download to. The OMNISCANNER2s are
listed by serial number. Select the appropriate scanner(s) and click OK
to continue.
To Next Page
Loading...
