sensALIGN 5 EX laser
Type Semiconductor laser
Power supply Batteries 2 x 1.5 V IEC LR6 (“AA“)
Only use Duracell Industrial ID 1500 or Energizer E91
Operating time: 120 hours
Environmental
protection
IP65 (dustproof and water jets resistant), shockproof
Relative humidity: 10% to 90%
Temperature
range
Operation: -10°C to 50°C (14°F to 122°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Dimensions Approx. 105 x 74 x 47 mm (4 9/64" x 2 29/32" x 1 27/32")
Weight Approx. 225 g (7.9 oz)
Wavelength 630 – 680 nm (red, visible)
Safety class Class 2 according to IEC 60825-1:2014
The laser complies with 21 CFR 1040.10 and 1040.11 except for devi-
ations pursuant to Laser Notice No. 50, dated June 24, 2007.
Safety pre-
cautions
Do not look into laser beam
Beam power < 1mW
Beam divergence 0.3 mrad
CE conformity Refer to the CE compliance certificate in www.pruftechnik.com
Intrinsic safety II 2G Ex ib op is IIC T4 Gb, Zone 1
Certificate number: EPS 15 ATEX 1 075; IECEx EPS 15.0068
Optical output power laser (failure) < 35 mW
To Previous Page
Loading...