Need help?Do you have a question about the Fluke PRUFTECHNIK ROTALIGN touchEX and is the answer not in the manual?
General| Laser Class | Class 2 |
|---|---|
| Display | Color touchscreen |
| Communication | Bluetooth, USB |
| Power Supply | Rechargeable battery |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Environmental Protection | IP65 (dust-tight and protected against water jets) |
| Resolution | 0.001 mm |
| Protection Class | IP65 |
Details the specific package configuration using the ecom Class I certified tablet.
Details settings like Language, Date, Time, Time zone, Animation state, and Auto brightness.
Describes the ruggedized tablet, its limitations, and how to start the Shaft Alignment application.
Describes the laser diode, beam emission, and operational indicators.
Details the system's pre-assembled brackets and how to mount them on shafts or couplings.
Guides the user on inputting required dimensions, unit selection, and navigation.
Explains misalignment values for compensating dynamic loads and how to enter them.
Explains how the wizard guides beam adjustment using arrows and status indicators.
Details the default measurement mode for horizontal coupled machines.
Explains how to enable and edit user-defined tolerances, including asymmetric options.
Details the process of saving asset measurements from the results screen.
Guides the user through diagnosis and correction of soft foot issues.
Details the Static Clock measurement mode for vertically mounted machines.
Procedure for measuring cardan shafts using the rotating plane method.
Step-by-step guide for updating the device's firmware via PC.
Detailed technical specifications for the sensALIGN 5 EX sensor.
To Next Page