Router Router objects
FortiGate-3000 Administration Guide 01-28006-0010-20041105 169
3 Enter a name for the key chain.
4 Select OK.
Key chain list entry
Figure 77: Key chain entry configuration
To configure a key chain entry
1 Go to Router > Router Objects > Key-chain.
2 Select the Add key-chain entry icon to add a new key chain entry or select the Edit
icon beside an existing key chain entry to edit that entry.
3 Enter a key.
4 Under Accept Lifetime, select the required hour, minute, second, year, month and day
to start using this key for received routing updates.
Key-chain entry The key chain name and the ID number for this key chain entry.
Key The key (password) can be up to 35 characters long.
Accept Lifetime Set the time period during which the key can be received.
Send Lifetime Set the time period during which the key can be sent.
Start For both accept and send lifetimes, set the start time and date for this
entry in the key chain.
End For both accept and send lifetimes, set the end time. The end time can be
a specified date and time, a duration in seconds (1 to 2147483646), or
infinite for a key that never expires.
To Next Page
Loading...
Need help?
General