Fortinet FortiGate FortiGate-3000 - To Enable Traffic Logging for a Firewall Policy

Log & Report Log config
FortiGate-3000 Administration Guide 01-28006-0010-20041105 367
To enable traffic logging for a firewall policy
You can enable traffic logging for a firewall policy. All connections accepted by the
firewall policy are recorded in the traffic log.
1 Go to Firewall > Policy.
2 Select the Edit icon for a policy.
3 Select Log Traffic.
4 Select OK.
5 Make sure you enable traffic log under Log Filter for a logging location and set the
logging severity level to Notification or lower.