Firewall Protection profile
FortiGate-3000 Administration Guide 01-28006-0010-20041105 235
Configuring IPS options
Figure 110:Protection profile IPS options
The following options are available for IPS through the protection profile. See “IPS” on
page 299 for more IPS configuration options.
Configuring content archive options
Figure 111:Protection profile content archive options
The following options are available for content archive through the protection profile.
Configuring protection profiles
To add a protection profile
If the default protection profiles do not provide the settings you require, you can create
custom protection profiles.
1 Go to Firewall > Protection Profile.
2 Select Create New.
3 Enter a name for the profile.
4 Configure the protection profile options.
5 Select OK.
Note: Some popular email clients cannot filter messages based on the MIME header. Check
your email client features before deciding how to tag spam.
IPS Signature Enable or disable signature based intrusion detection and
prevention for all protocols.
IPS Anomaly Enable or disable anomaly based intrusion detection and
prevention for all protocols.
Archive content
meta-information
Enable or disable archiving content meta-information to a FortiLog
unit for each protocol. Content meta-information can include date
and time, source and destination information, request and response
size, and scan result. Content archive is only available if FortiLog is
enabled under Log&Report > Log Config > Log Settings.
To Next Page
Loading...
Need help?
General