System DHCP Dynamic IP
FortiGate-3000 Administration Guide 01-28006-0010-20041105 85
DHCP IP/MAC binding settings
Figure 27: IP/MAC binding options
To add a DHCP IP/MAC binding pair
1 Go to System > DHCP > IP/MAC Binding.
2 Select Create New.
3 Add a name for the IP/MAC pair.
4 Add the IP address and MAC address.
5 Select OK to save the IP/MAC pair.
Dynamic IP
You can view the list of IP addresses that the DHCP server has assigned, their
corresponding MAC addresses, and the expiry time and date for these addresses.
To view the dynamic IP list
1 Go to System > DHCP > Dynamic IP.
2 Select the interface for which you want to view the list.
Name Enter a name for the IP/MAC address pair.
IP Address Enter the IP address for the IP and MAC address pair. The IP address must
be within the configured IP range.
MAC Address Enter the MAC address of the device.
Interface Select to display its dynamic IP list.
IP The IP addresses that the DHCP server has assigned.
MAC The corresponding MAC addresses for the dynamic IP addresses.
Expire The expiry time and date for the dynamic IP addresses and their corresponding
MAC addresses.
To Next Page
Loading...
Need help?
General