System network FortiGate IPv6 support
FortiGate-3000 Administration Guide 01-28006-0010-20041105 77
FortiGate IPv6 support
You can assign both an IPv4 and an IPv6 address to any interface on a FortiGate unit.
The interface functions as two interfaces, one for IPv4-addressed packets and
another for IPv6-addressed packets.
FortiGate units support static routing, periodic router advertisements, and tunneling of
IPv6-addressed traffic over an IPv4-addressed network. All of these features must be
configured through the Command Line Interface (CLI). See the FortiGate CLI
Reference Guide for information on the following commands:
Table 2: IPv6 CLI commands
Feature CLI Command
Interface configuration, including periodic
router advertisements
config system interface
See the keywords beginning with “ip6”.
config ip6-prefix-list
Static routing config router static6
IPv6 tunneling config system ipv6_tunnel
To Next Page
Loading...
Need help?
General