Fortinet FortiGate FortiGate-3000 Administration Guide

Antivirus CLI configuration
FortiGate-3000 Administration Guide 01-28006-0010-20041105 325
This example shows how to display the antivirus HTTP traffic settings.
get antivirus service http
This example shows how to display the configuration for antivirus HTTP traffic.
show antivirus service http
service ftp
Use this command to configure how the FortiGate unit handles antivirus scanning of
large files, how the FortiGate unit handles the buffering and uploading of files to an
FTP server, and what ports the FortiGate unit virus scans for FTP traffic.
Command syntax pattern
config antivirus service ftp
set <keyword> <variable>
end
config antivirus service ftp
unset <keyword>
end
get antivirus service [ftp]
show antivirus service [ftp]
Example
This example shows how to add antivirus scanning for FTP traffic on ports 22 and 23.
Adding more ports for scanning does not erase the default, port 21. Use the unset
command to remove all ports from the list.
config antivirus service ftp
set port 22
set port 23
end
This example shows how to display the antivirus FTP traffic settings.
get antivirus service ftp
This example shows how to display the configuration for antivirus FTP traffic.
show antivirus service ftp
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
Table 28: antivirus service ftp command keywords and variables
Keywords and variables Description Default Availability
port <port_integer> Configure antivirus scanning on a
nonstandard port number or
multiple port numbers for FTP.
You can use ports from the range
1-65535. You can add up to 20
ports.
21 All models.

Fortinet FortiGate FortiGate-3000 Specifications

General

Brand	Fortinet
Model	FortiGate FortiGate-3000
Category	Firewall
Language	English