3.1 LED Monitor, Keys and LED Indicators on the Keypad
3-2
Item
LED Monitor, Keys,
and LED Indicators
Functions
Hz, A, kW, r/min, m/min:
The unit of numeral displayed on the LED monitor in Running mode is identified by
combination of lit and unlit states of these three LED indicators. Refer to Section 3.3.1
"Monitoring the running status" for details.
Unit LEDs
(3 LEDs)
PRG. MODE:
While the inverter is in Programming mode, the LEDs of Hz and kW light.
(Hz A kW)
LED Indicators
x10 LED
x10 LED lights when the data to display exceeds 9999. When this LED lights, the
"displayed value x 10" is the actual value.
Example: If the data is 12,345, the LED monitor displays
1234
and x10 LED lights at
the same time, meaning that the actual value is "1,234 × 10 = 12,340."
USB Port
The inverter can be connected to a PC via a USB cable.
The connector type on the inverter side is a miniB type.
To Next Page
Loading...
