Fuji Electric Frenic Mega Series - Chapter 4 Operation

Chapter 4
OPERATION
Contents
4.1 Test Run ....................................................................................................................................4-1
4.1.1 Test run procedure .............................................................................................................4-1
4.1.2 Checking prior to powering on ...........................................................................................4-2
4.1.3 Powering on and checking................................................................................................. 4-2
4.1.4 Selecting an inverter drive mode (HD/MD/LD)................................................................... 4-3
4.1.5 Selecting a motor drive control...........................................................................................4-4
4.1.6 Basic settings of function codes < 1 > ............................................................................... 4-8
4.1.7 Basic settings/tuning of function codes < 2 >.....................................................................4-9
4.1.8 Basic settings/tuning of function codes < 3 >...................................................................4-12
4.1.9 Basic settings of function codes < 4 > .............................................................................4-17
4.1.10 Basic settings of function codes < 5 > .............................................................................4-18
4.1.11 Basic settings/tuning of function codes < 6 >................................................................... 4-19
4.1.12 Running the inverter for motor operation check...............................................................4-22
4.1.13 Preparation for production run .........................................................................................4-24
4.2 Special Operation....................................................................................................................4-25
4.2.1 Jogging operation.............................................................................................................4-25
4.2.2 Remote and local modes .................................................................................................4-26
4.2.3 External run/frequency command ....................................................................................4-27