2.2 Wiring
2-34
Position of each connector
The individual switching connectors are positioned on the power supply printed circuit board as shown in the
figure below.
(a) For FRN37G1S-2J to FRN75G1S-2J, and
FRN75G1S-4J to FRN110G1S-4J
(b) For FRN90G1S-2J, and
FRN132G1S-4J to FRN630G1S-4J
Figure 2.2-28 Switching Connector Positions
Figure 2.2-29 Attachment and Removal of the
Switching Connector
When removing the individual connectors, pinch the
upper portion of the connector with the fingers, unlock
the fastener, and pull. When inserting the connector,
push in until the fastener lock engages with the
receiving end with a click.
Power supply switching
connector "CN UX"
Fan power
source
switching
connectors
To Next Page
Loading...
