2.4 Protective Functions
2-43
Chapter 2 INSTALLATION AND WIRING
Note: In Alarm output [30A/B/C] column, "Yes*" means that an alarm may not be issued depending upon
function code setting.
*1 Available under V/f control with speed sensor. (PG option required)
*2 Available under dynamic torque vector control with speed sensor. (PG option required)
*3 Available under vector control without speed sensor.
*4 Available under vector control with speed sensor. (PG option required)
*5 Available in inverters having a ROM version 3000 or later.
To Next Page
Loading...
