Check Mailbox
125
•Printing
• Deleting automatically after specified days
•Deleting
The document processing types you can register in a job flow sheet depend on how
documents are stored in a private mailbox. See the following chart.
O: Available
X: Not available
*1: Depends on the System Administrator settings.
NOTE: Only the job flow sheets you are permitted to execute are displayed on the
screen.
NOTE: In case of forwarding a document, faxed or stored in the mailbox, by e-mail,
FTP, or SMB, it cannot be opened by the recipient if the [File Format] of the job flow
sheet is set to [JPEG].
1. Select [Job Flow Settings] on
the [Document List] screen.
NOTE: To link a document to a job
flow sheet, select the required
document on the screen.
2. Perform the necessary
operations.
3. Select [Close].
Auto Start
Select this check box to set the linked job flow sheet to be automatically executed when
a new document is saved in the mailbox. This check box appears only when the
mailbox has been linked with a job flow sheet.
NOTE: Mailboxes with this option enabled are marked with an arrow above their
icons.
Start
Executes the linked job flow sheet and returns to the [Document List] screen. This
button appears only when the mailbox has been linked with a job flow sheet.
Cut Link
Releases linkage with a job flow sheet.
Fax iFax E-mail FTP SMB Printer
Fax for polling O O O O O O
Scan X X O O O X
Received faxOOOOOO
Received iFax O *1 *1 O O O
Output
Input
To Next Page
Loading...
Need help?
General
