3 Copy
48
Uncollated
Delivers the copies in stacks based on the number of copies required for each
document. For example, two copies of a three-page document are delivered in the
order 1-1, 2-2, 3-3.
More
Displays the [Copy Output/Stapling] Screen.
[Copy Output/Stapling] Screen
Allows you to select the sorting method for your output and specify the output tray.
1. Select [More] for the [Copy
Output/Stapling] feature on the
[Basic Copying] screen.
2. Select the required option.
3. Select [Save].
Auto
Automatically applies sorting methods for copy output. Refer to the [Auto] option
explained previously.
Collated/Stapling
Refer to the [Collated] option explained previously.
Uncollated
Refer to the [Uncollated] option explained previously.
Stapling
Displays the [Copy Output/Stapling] screen.
Output Destination
Select an output tray for the copy job from [Center Output Tray], [Side Output Tray],
and [Finisher Tray].
NOTE: When the Center Output Tray - Upper is installed, two separate destinations
are displayed for the Center Output Tray: [Center Output Tray - Upper] and [Center
Output Tray - Lower].
To Next Page
Loading...
Need help?
General
