8.3 VTL Wizard
At any time while using the wizard, you can click Previous to return to the previous
step.
Figure 105: VTL Wizard: About
Step 2: Add Partition
1. Under Partition Settings, enter information about the partition (see "VTL Wizard: Add
Partition" on page 158).
Name Enter the name of the VTL partition.
Library Model Select the library model emulated by the partition. The library
model determines the inquiry string returned to the host by
the ETERNUS CS800.
The following library models are available:
l Fujitsu CS-TL
l ADIC Scalar 100, ADIC Scalar i2000, or ADIC Scalar
i500
l ADIC Pathlight VX
Number of Storage
Slots
Accept the default number of storage slots(based on model),
or enter the number of storage slots in the partition (up to
9,000).
One I/E slot is created for each storage slot up to a
maximum of 240 I/E slots.
156 ETERNUS CS800
To Next Page
Loading...
