Media Type The media type of the cartridges.
The available media type options are determined by the
type of tape drive selected when the partition was created
(see "Adding a VTL Partition" on page 219).
Media Capacity The capacity of the cartridges. Select an option:
l Native Size - The capacity is determined by the
selected media type.
l Custom Size - The capacity is a custom value. Enter
the custom cartridge capacity in the box. Make sure the
value is within the acceptable range displayed next to
the box
3. Click Add.
4. (Optional) To add additional media, repeat Steps 1–3.
Click Next to continue.
Figure 107: VTL Wizard: Add Media
Step 4: Discover Remote Hosts
1. Click Discover Remote Hosts to list all hosts that are known to the ETERNUS CS800
(see "VTL Wizard: Discover Remote Hosts" on page 160).
A host is made known to the ETERNUS CS800 if you enter the host ID on this page, or if
the host logs on to one or more Fibre Channel target ports.
ETERNUS CS800 159
8 Configuration Wizards
To Next Page
Loading...
