Partition Name The VTL partition associated with the group.
Devices The number of virtual media changers (VMCs) and virtual tape
drives (VTDs) associated with the group
Click a column heading to sort the rows in the table by that column. Click the
column heading again to reverse the sort order.
Adding a Remote Host Access Group
Add a host access group to associate a VTL partition with a host (a Fibre Channel initiator on
the SAN) and a target (a Fibre Channel port on the ETERNUS CS800).
To add a host access group:
1. Click Add.
The Map Remote Hosts, Define Groups page displays (see "Map Remote Hosts,
Define Groups Page" on page 235).
Figure 154: Map Remote Hosts, Define Groups Page
2. Enter information about the host access group:
Group Name Enter a name for the group.
Partition Select the partition to associate with the group.
ETERNUS CS800 235
10 Configuration
To Next Page
Loading...
