New Password Enter the new password.
Confirm New Password Enter the new password again to confirm it.
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special characters
are allowed.
3. Click Apply.
Enabling CLI Accounts
The CLI accounts provide access to the ETERNUS CS800 command line interface as an
administrator or monitor.
For more information about using the CLI, see the ETERNUS CS800 Command
Line Interface (CLI) Guide.
To enable or disable the CLI accounts:
1. Under CLI Administrator or CLI Viewer, do one of the following steps:
l Select the Enable CLI Administrator Login or Enable CLI View Login check
box to enable the CLI administrator or viewer account.
l Clear the Enable CLI Administrator Login or Enable CLI View Login check box
to disable the CLI administrator or viewer account.
2. The CLI administrator and view accounts may be configured with Secure Shell (SSH)
key-based authentication.
l "Add a SSH Public Key" on page 341
l "Edit a SSH Public Key" on page 344
l "Delete an Alias Name" on page 344
Add a SSH Public Key
a. Click Add.
The Add Public Key page displays.
ETERNUS CS800 341
10 Configuration
To Next Page
Loading...
