Fujitsu ETERNUS CS800 - Page 346

10.9 System
To enable or disable the GUI service account:
1. Under GUI Service do one of the following steps:
l Select the Enable GUI Service Login check box to enable the GUI service
account.
l Clear the Enable GUI Service Login check box to disable the GUI service
account.
2. Enter the following information:
New Password Enter the new password.
Confirm New Password Enter the new password again to confirm it.
Additional Information
l Passwords can be up to 32 characters. Alphanumeric characters and special
characters are allowed.
3. Click Apply.
Enabling SSH Service Account
The SSH service account provides SSH remote access to the ETERNUS CS800 system.
1. Under SSH Service, do one of the following steps:
l Select the Enable SSH Service Login check box to enable SSH service
l Clear the Enable SSH Service Login check box to disable the SSH service
account
2. The SSH service account may be configured with Secure Shell (SSH) key-based
authentication.
l "Add a SSH Public Key" on page 346
l "Edit a SSH Public Key" on page 349
l "Delete an Alias Name" on page 349
Add a SSH Public Key
a. Click Add.
The Add Public Key page displays.
346 ETERNUS CS800