Fujitsu ETERNUS CS800 - Page 400

11.4 Receive VTL
Started The time the failback job was started.
Finished The time the failback job finished.
Status The status of the failback job (Success, In Progress, or Failed).
Use the Failback Jobs page to perform the following tasks:
To delete information for a failback job, select it in the Snapshot Failback Jobs section and
click Delete Job Info.
To abort a failback job that is in progress, select it in the Snapshot Failback Jobs section
and click Abort.
Cartridge Based
The Cartridge Based page allows you to manage Cartridge Based Replication on the target
system. You can configure a VTL partition to receive Cartridge Based Replication data sent
from a source system and view replication statistics for the partition.
For information about creating VTL partitions, see "Adding a VTL Partition" on
page 219.
To access the Cartridge Based page, on the Receive VTL page, click the Cartridge Based
tab (see "Cartridge Based Page" on page 400).
Figure 253: Cartridge Based Page
400 ETERNUS CS800