12.5 VTL Status
For information about creating VTLs, see "Adding a VTL Partition" on page 219.
To access the VTL Status page, click the Status menu, and then click the VTL tab.
The VTL Status page contains the following tabs:
l "Physical View" on page 424
l "Logical View" on page 426
l "Performance View" on page 427
Physical View
The Physical View page allows you to view a physical representation of the virtual
components in a VTL. You can view information about virtual tapes drives, storage slots, and
cartridges.
To access the Physical View page, on the VTL Status page, click the Physical View tab
(see "Physical View Page" on page 424).
Figure 269: Physical View Page
424 ETERNUS CS800
To Next Page
Loading...
