Fujitsu ETERNUS CS800 - Page 444

14.2 Diagnostics
To access the General page, on the Healthchecks page, click the General tab (see
"General Page" on page 444).
Figure 284: General Page
The General page displays the following information about the most recently run
healthchecks:
Status The status of the healthchecks (In Progress, Success, Failed, or
Interrupted).
Progress The percentage complete of the healthchecks.
Start
Time
The time the healthchecks started.
End Time The time the healthchecks ended.
Use the General page to perform the following tasks:
l To start all enabled healthchecks, click Start.
l To stop all healthchecks in progress, click Stop.
Status
The Status page allows you to view information about the most recent test results for each
healthcheck. You can also enable or disable a healthcheck.
The following healthchecks are available:
l De-Duplication - Checks the overall health of the blockpool. This healthcheck verifies
that the metadata in the namespace file and the data tags in the blockpool are correctly in
sync.
444 ETERNUS CS800