TX100 S3
Upgrade and Maintenance Manual
Version history
Issue number Reason for update
1.0 / August 2011 Initial release
2.0 / December 2011 Deleted:
– 4.6.1 Switching on the server with a 0-Watt device
(is described in OM)
Inserted/changed:
– Chapter 6 structure changed
– 6.2 Average task duration increased
– 6.2.2 Removing HDD cage inserted
– 7.3.3 Note inserted (disconnecting SATA cables)
– 11.2.6 Note inserted
– 14.1 CMOS battery: Average task duration
increased
– 14.1.1 Required tools changed
– 14.3.3 Note inserted (disconnecting SATA cables)
– 14.1.4, 14.3.2, 14.3.5 Backup and restore BIOS
settings manually procedure inserted
– 15.2 Figure 193 Power cable, numbered and links
set in the document
– Editorial corrections
3.0 / May 2012 New model TX100 S3p, FBU, slimline ODD, changed
system fan, new heat sink, changed handling thermal
paste
4.0 / February 2013 Added cabling information on USB 3.0 RDX drives
5.0 / February 2014 Chapter 5.2.10
To Next Page
Loading...
Need help?
General