Fujitsu PRIMERGY TX100 S3 Maintenance Manual

TX100 S3 Upgrade and Maintenance Manual 87
6 Power supply
The PRIMERGY TX100 S3 server is equipped with a standard power supply
unit that automatically adjusts to any mains voltage in the range of 100 VAC to
240 VAC.
V CAUTION!
The server supports a mains voltage in the range of 100 VAC to
240 VAC. You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
Safety notes
V CAUTION!
● Do not disassemble the power supply unit. Doing so may cause
electric shock.
● Areas around the power supply unit may remain extremely hot after
shutdown. After shutting down the server, wait for hot components to
cool down before removing the power supply unit.
● The power supply unit is heavy, so handle it carefully. If you drop it by
mistake, injuries may result.
● For further safety information, please refer to chapter "Important
information" on page 29.

Fujitsu PRIMERGY TX100 S3 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3
Category	Server
Language	English