TX100 S3 Upgrade and Maintenance Manual 67
Basic hardware procedures
4.9 Concluding software tasks
Ê Perform the following software tasks to put the server back in operation:
– "Verifying the system time settings" on page 78
– "Viewing and clearing the System Event Log (SEL)" on page 79
– "Updating the NIC configuration file in a Linux environment" on page 80
– "Enabling BitLocker functionality" on page 82
– "Performing a RAID array rebuild" on page 83
– "Looking up changed MAC / WWN addresses" on page 83
To Next Page
Loading...
