TX100 S3 Upgrade and Maintenance Manual 321
15 Cabling
Safety notes
V CAUTION!
● Always hold cables by their connectors when disconnecting them.
Never pull on the cable to disconnect cables.
● Ensure that none of the cables are scraped, strained or otherwise
damaged while replacing system components.
● Immediately replace cables with damaged shielding.
● Always use shielded network cables.
I In the following sections only complex cable routings are described.
You will find replacing the front panel cable and replacing the front USB
cable in chapter "Front panel and external connectors" on page 273.
To Next Page
Loading...
